
Support-free laser powder bed fusion, from bars to closed impellers
Doctoral research, McGill University, 2018–2024
Overhangs below 45° normally need supports, and internal ones cannot be removed. I developed a geometry-based feed-forward method that balances heat input by adjusting laser parameters layer by layer. It was tested on 60 mm bars and then on closed impellers at two scales and two layer thicknesses.
Each step was characterized: residual stress, surface topography, grain structure, cell size, hardness and tensile properties.
5° overhangs at 30 µm layers; IN625 closed impellers up to 20.5 cm with 790 MPa yield, 1040 MPa UTS, 45% elongation and density above 99.9%. Patent application US20230405681A1.























