LPBF course for Stryker

A 360-slide course on laser powder bed fusion that I designed and taught to Stryker engineers through IIT Guwahati’s Advanced Training Program on Additive Manufacturing Technologies, Phase II, from 19 July to 14 August 2024.

The course runs from the machine to the qualified part, in three modules. It mixes physics, my own research data and industrial case studies, and it was built for engineers who make medical implants. A selection of slides is shown below; the full course is available to partners on request.

Amit Kumar with Stryker engineers after the course
With the Stryker engineers after the course.
  • 360 slides
  • 3 modules, from machine to qualified part
  • 4 weeks, July to August 2024
  • Delivered for Stryker through IIT Guwahati

Part A: LPBF sub-systems

Sessions 1 to 6, slides 1–142

How a laser powder bed fusion machine actually works, sub-system by sub-system, and how each one shows up in part quality.

Cover slide of Part A: Session 1-6
Cover. Part A: Session 1-6

What it covers

  • Laser source, beam delivery, galvanometer and caustic measurement
  • Melt pool physics: conduction, transition and keyhole modes, heat-source models
  • Recoaters: blade, brush, roller and electrostatic, with soft-versus-hard case studies
  • Spatter: formation mechanisms, characterization and the defects it causes
  • Sealed chamber, inert gas flow, nozzle placement and chiller
  • Build plates: sizes, materials, heating and distortion
  • In-situ monitoring: optical, thermal, acoustic and X-ray
  • Powder handling, sieving and storage; controllers and software
Course slide 8: The map used throughout Part A: the eight sub-systems of an LPBF machine.
Slide 8. The map used throughout Part A: the eight sub-systems of an LPBF machine.
Course slide 79: Chamber preparation: how the vacuum, gas circulation, filtering and oxygen sensing work together.
Slide 79. Chamber preparation: how the vacuum, gas circulation, filtering and oxygen sensing work together.

Part B: materials science, characterization and powder

Sessions S1 and S2, slides 143–193

From a printed part back to the questions an engineer must answer before it can be qualified, and from the powder forward to the build.

Cover slide of Part B-S1, 5 August 2024
Cover. Part B-S1, 5 August 2024
Cover slide of Part B-S2
Cover. Part B-S2

What it covers

  • Qualification decisions: dimensional accuracy, surface, density, microstructure, mechanical testing, heat treatment and HIP
  • Residual stress assessment and fracture behaviour
  • Machining and post-processing surface treatments
  • Feedstock properties: size, morphology, packing and flowability
  • Powder characterization methods for LPBF and EPBF
  • Spatter particles: chemistry, size, speed and their effect on properties
Course slide 145: Session S1 opens with a real part: my support-free closed impellers. What would you need to check?
Slide 145. Session S1 opens with a real part: my support-free closed impellers. What would you need to check?
Course slide 146: The characterization and qualification map built around that part.
Slide 146. The characterization and qualification map built around that part.
Course slide 167: The powder characterization toolkit, from particle size to rheometry.
Slide 167. The powder characterization toolkit, from particle size to rheometry.

Part C: defects, process parameters and DfAM

Slides 194–360

Why parts fail, how parameters are chosen, and how to design parts that build right the first time.

Cover slide of Part C
Cover. Part C

What it covers

  • Defects: cracking, gas and keyhole porosity, lack of fusion, balling
  • Process simulation: finite volume (thermo-fluid) and finite element (thermal, thermo-metallurgical, thermo-mechanical) models, melt-pool geometry and cooling rates
  • Solidification microstructures and the G–R map
  • Residual stress: mechanisms, scale, scan length, bridge geometry and heat treatment
  • Process parameters: spot size, power, speed, hatch, energy density, P-V maps
  • Layer thickness case studies in SS316L and IN718
  • Scan strategies, contouring and layer rotation
  • DfAM: decision-making, benchmarking artifacts, design guidelines and an IN718 case study
  • Overhangs and supports, orientation, topology optimization, generative design and lattices
  • LPBF standards and surface post-treatments
Course slide 232: The thread of Part C: process parameters set the structure, and the structure sets the properties.
Slide 232. The thread of Part C: process parameters set the structure, and the structure sets the properties.
Course slide 244: Reading a power-speed (P-V) map: keyhole, balling, lack of fusion and the process window.
Slide 244. Reading a power-speed (P-V) map: keyhole, balling, lack of fusion and the process window.
Course slide 246: P-V assessment with an infrared camera, IN625: melt pool shape across seven cases.
Slide 246. P-V assessment with an infrared camera, IN625: melt pool shape across seven cases.
Course slide 203: Modelling LPBF across scales: thermo-fluid (finite volume) models of the melt pool, and thermal, thermo-metallurgical and thermo-mechanical (finite element) models of the part.
Slide 203. Modelling LPBF across scales: thermo-fluid (finite volume) models of the melt pool, and thermal, thermo-metallurgical and thermo-mechanical (finite element) models of the part.
Course slide 205: Simulated melt-pool geometry from the front, side and top.
Slide 205. Simulated melt-pool geometry from the front, side and top.
Course slide 207: Simulated thermal history with depth: heating rate, solidification range and cooling rate.
Slide 207. Simulated thermal history with depth: heating rate, solidification range and cooling rate.
Course slide 269: Layer thickness case study, IN718: relative density across power, speed and hatch at 30 µm.
Slide 269. Layer thickness case study, IN718: relative density across power, speed and hatch at 30 µm.
Course slide 272: Density summary and statistics across 30, 60 and 80 µm layers, IN718.
Slide 272. Density summary and statistics across 30, 60 and 80 µm layers, IN718.
Course slide 289: Choosing AM: the decision steps from requirement to cost assessment.
Slide 289. Choosing AM: the decision steps from requirement to cost assessment.
Course slide 290: How long each decision step takes in practice.
Slide 290. How long each decision step takes in practice.
Course slide 317: Simulated heat accumulation as the overhang angle drops from 45° to 10°.
Slide 317. Simulated heat accumulation as the overhang angle drops from 45° to 10°.
Course slide 342: The LPBF standards map: design, materials, test methods and applications.
Slide 342. The LPBF standards map: design, materials, test methods and applications.

Want this course for your team?

I adapt the material for industry teams, students and research groups, from a one-day introduction to a full multi-week program.

Ask about a course See all courses